beautypg.com

Temporary errors, Temporary, Appendix – Fujitsu Ricoh Fujitsu fi-7700 Document Scanner User Manual

Page 129: Glossary introduction index contents top

background image

Appendix

Chapter 7 Troubleshooting

Glossary

Introduction

Index

Contents

TOP

129

How to Load
Documents

How to Use the
Operator Panel

Various Ways to
Scan

Daily Care

Operational
Settings

Replacing the
Consumables

Scanner
Overview

Troubleshooting

Temporary Errors

The following are lists of temporary errors which can be
recovered by operators.

Paper Feeding Errors

Error codes beginning with the letter "J" are displayed.

Error

code

Error messages

Action

J0:37

Paper protection
(feeding noise)
Remove and
check the
document, and
then try again
carefully.

1 Remove the jammed document.

For details, refer to

"7.1 Paper Jam"

(page 126)

.

2 Check if the document is suitable for

scanning by ADF.
For details, refer to

"2.3 Documents for

Scanning" (page 47)

.

3 Press the [Menu] button on the

operator panel, select whether to
enable or disable the document
protection function, and then press the
[Scan/Enter] button or perform a scan
from the computer.

J0:51

Paper protection
(feeding
accuracy)
Remove and
check the
document, and
then try again
carefully.

1 Remove the jammed document.

For details, refer to

"7.1 Paper Jam"

(page 126)

.

2 Make sure that documents that are

folded or documents that do not
conform to the paper specifications,
such as thin paper, are not included.
For details, refer to

"2.3 Documents for

Scanning" (page 47)

.

3 Press the [Menu] button on the

operator panel, select whether to
enable or disable the document
protection function, and then press the
[Scan/Enter] button or perform a scan
from the computer.

J1:31
J1:36

Paper jam
Remove and
check the
document, and try
again.

1 Remove the jammed document.

For details, refer to

"7.1 Paper Jam"

(page 126)

.

For "J1:5A", remove the document in
the imprinter.
For details, refer to the fi-760PRB
Imprinter Operator's Guide.

2 Check if the document is suitable for

scanning with the ADF or the imprinter.
For details, refer to

"2.3 Documents for

Scanning" (page 47)

or the fi-760PRB

Imprinter Operator's Guide.

3 Clean the rollers.

For details, refer to

"Chapter 5 Daily

Care" (page 104)

.

J1:5A
(*1)

J1:50

Pick error
Remove and
check the
document, and try
again.

Error

code

Error messages

Action