Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7700 Document Scanner User Manual
Page 174

Chapter 8 Operational Settings
174
Manual Feeding
Select whether to enable or disable the
continuous feed mode.
This setting can also be configured with the
operator panel.
Disable/Enable
Disable
Timeout Time: Specify the waiting time for the
scanner to cancel manual feeding.
This setting can also be configured with the
operator panel.
5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100,
110, 120, 180, 240, 300, 360, 420, 480, 540,
600, 900, 1200, 1500, 1800, 1999 (seconds)
10 seconds
Power Switch Control
Specify the method by which the scanner is
powered on/off.
Enable power switch/Disable power switch/
Enable USB power feeding
Enable power
switch
Paper Protection
Select a paper protection detection method.
This function can reduce the risk of having the
documents damaged by detecting a feeding
error and stopping the scan in the following
cases:
When the scanner detects a document that
was unusually warped by a feeding error
When the scanner detects paper jam noise
When the scanner either detects a
document that was unusually warped by a
feeding error or detects paper jam noise
This setting can also be configured in the
scanner driver or with the operator panel. When
the operator panel setting is prioritized, the
operator panel setting is prioritized over the
Software Operation Panel setting. Note that
even if the operator panel setting is prioritized,
the scanner driver setting has the highest
priority.
Disable/Feeding Accuracy/Feeding Noise/
Feeding Accuracy & Noise
Feeding
Accuracy
Item
Description
Parameter/Value
Factory Default