Specify the sensitivity level to detect anomalies
upon feeding the documents when paper
protection is enabled.
This setting can also be configured with the
operator panel. When the operator panel setting
is prioritized, the operator panel setting is
prioritized over the Software Operation Panel
setting.

Detect: Feeding Accuracy/Feeding Noise
Low/Normal/High

Normal

Scan Setting for Document with
Tab (Automatic Page Size
Detection)

(page 193)

For a document that includes index sheets or a
document with index stickers (or tabs) attached
at the bottom edge, you can specify whether or
not to include the index portion (or tab) images
during scanning with the Auto Paper Size
Detection setting.

Document with tab/Document without tab/
Non-rectangular document

Document
without tab

Pick Pressure

(page 194)

Set the pick pressure for feeding paper.

Low/Default/High

Default

Maintenance and Inspection
Cycle

(page 211)

Specify the period of time for regular
maintenance and inspection of the scanner by a
service engineer.

Disable/Enable
Maintenance and inspection cycle: 1 to 12
months

Disable

Overscan Control

(page 195)

Set this to expand the amount of overscan and
output an image if part of the image appears
missing due to an abnormal skew during
overscan.
This setting can also be configured with the
operator panel.

Normal/Expand

Normal

High Altitude Mode

(page 196)

Select whether to enable or disable high altitude
mode.
Enable this mode to use the scanner at an
altitude of 2,000 m or higher.

Enable/Disable

Disable

Image Quality Mode

(page 196)

Set the image quality mode.
To obtain an image quality that is close to the
image quality for scanning with fi-6670/fi-6770/
fi-6750S, set the image quality mode.

fi-6670/fi-6770/fi-6750S/Disable

Disable

Item

Description

Parameter/Value

Factory Default