Multifeed
detected
(Overlap)
Press the Scan/
Enter button to
eject the
document.
After ejecting the
document,
multifeed
detection for the
next document
can be enabled/
disabled from the
Menu button.

1 Press the [Scan/Enter] button on the

operator panel to eject the documents.

2 Press the [Menu] button on the

operator panel, select whether or not
to detect multifeed, and then press the
[Scan/Enter] button or perform a scan
from the computer.

Multifeed
detected
(Overlap)
Press the Scan/
Enter button to
eject the
document.
Press the Menu
button to
memorize the
multifeed pattern.

1 Press the [Scan/Enter] button on the

operator panel to eject the documents.

2 Press the [Menu] button on the

operator panel, select whether or not
to memorize the pattern, and then
press the [Scan/Enter] button or
perform a scan from the computer.

Multifeed
detected
(Overlap)
Press the Scan/
Enter button to
eject the
document.

1 Press the [Scan/Enter] button on the

operator panel to eject the documents.

2 Press the [Scan/Enter] button on the

operator panel or perform a scan from
the computer.

Error

code

Error messages

Action

J2:56

Multifeed
detected (Length)
Press the Scan/
Enter button to
eject the
document.

1 Press the [Scan/Enter] button on the

operator panel to eject the documents.

2 Press the [Scan/Enter] button on the

operator panel or perform a scan from
the computer.

J7:5F

Feed mode
switched
Check the feed
mode switch
setting, reload the
documents and
try again.

Check the position of the feed mode
switch, reload the documents and try
again.

J8:01

Sensor(s) dirty
Clean the Pick
Sensor.

Open the ADF and clean the eight
document sensors.
For details, refer to

"Chapter 5 Daily

Care" (page 104)

J8:04

Sensor(s) dirty
Clean the READ-
TOP Sensor.

J9:39

Paper jam
Please clean
rollers.

Open the ADF and clean the rollers.
For details, refer to

"Chapter 5 Daily

Care" (page 104)

Error

code

Error messages

Action