*1: When you select an item in the screen, the parameter currently selected is highlighted.
*2: "*" is displayed for the factory default setting in the screen.

21: Ope. Panel
Initialization

Initialize the settings of the operator panel.
Note that the language setting and any items
without a factory default setting are not initialized.

1: Yes
2: No

(*4)

22: Power saving

Specify the waiting time for the scanner to enter
power saving mode.
This setting can also be configured from the
Software Operation Panel.

5 to 115 (in increments of 5) (minutes)

23: Power-off time

Specify the period of time for the scanner to be
automatically turned off.
This setting can also be configured from the
Software Operation Panel.

Disable, 1, 2, 4, 8 (hours)

24: Pre-Pick

Select [1: Yes] to prioritize the processing speed.
Otherwise, select [2: No].
This settings can also be configured from the
scanner driver or the Software Operation Panel.
Note that priority is given to the scanner driver
setting.

1: Yes
2: No

1: Yes

25: Overscan
Control

Expands the amount of overscan and outputs an
image if part of the image appears missing due to
an abnormal skew during overscan.
This setting can also be configured from the
Software Operation Panel.

1: Normal
2: Expand

1: Normal

26: USB

Change the USB setting if a connection between
the scanner and a computer cannot be established.
After the setting is changed, the scanner is
restarted.

1: Automatic
2: USB 2.0

1: Automatic

Item

Description

Parameter (*1)/Value

Factory

Default

(*2)

-: No parameters/values