Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7700 Document Scanner User Manual
Page 202
Chapter 8 Operational Settings
202
Example 1:
Position: Middle
Selected range = Enable, Start = 50 mm, End = 200 mm
Multifeeds are detected only within the area of light blue.
Start
(Middle)
Displays the start position of the detection End Displays the end position of the detection HINT When both [Start] and [End] are set to "0", multifeed detection is To disable multifeed detection for the whole document, select If you set a value larger than the document length for the start To detect multifeeds, the detection range must be at least 5 mm You can also set the start and the end positions by the following displayed image. Range Description Unit: mm 35 50 200 Feed
by the length from the leading edge of the
document.
Range: 0 to 510 mm, in 2 mm increments,
Start
(Middle)
by the length from the leading edge of the
document.
Range: 0 to 510 mm, in 2 mm increments,
Start
performed for the whole area regardless of whether it is
enabled or disabled.
[Disable] and set the start position to "0" and the end position to
equal the document length or longer.
position, selecting [Disable] detects the whole length of the
document and selecting [Enable] disables the multifeed
detection.
in length.
Configure the setting so that the value of the end position minus
the start position is 6 mm or more.
methods:
- Draw an area with the mouse on the displayed image.
- Drag the handles for [Start] and [End] positions on the
Direction