Fujitsu Ricoh Fujitsu fi-7700 Document Scanner - Manual (Page 42)

Index
Contents
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
42
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
4
Adjust the side guides to the width of the documents.
Move the side guides by pressing the side guide button so that there
is no space between the side guides and the documents.
Otherwise, the documents may be fed skewed.
5
Scan the documents with the image scanning application.
For details, refer to the image scanning application manual.
■
Loading Documents to the Left or Right Side of the ADF
Paper Chute (Feeder)
1
Adjust the ADF paper chute (feeder) according to the
length of the documents.
For details, refer to "1.7 Setting Up the ADF Paper Chute (Feeder)"
(page 29) .
2
Adjust the stacker according to the length of the
documents.
For details, refer to "1.8 Setting Up the Stacker" (page 30) .
3
Slide the side guides fully outward.
Side Guides
Side Guide Button
Side Guides