Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7700 Document Scanner User Manual
Page 173
Chapter 8 Operational Settings
173
Number of paper feeding retries
Configure this setting to change the number of
feeding retries when a pick error occurs.
This setting can also be configured with the
operator panel.
1 to 12 times
3 times
Cleaning Cycle
Specify the scanner cleaning cycle.
Select whether or not to display the cleaning
instruction message from the scanner driver.
1,000 to 255,000 sheets
(in increments of 1,000)
[Show cleaning instructions] check box
10,000 sheets
Not selected
Life Counter Alarm Setting
Specify the replacement cycle for the
consumables.
Pick Rollers/Brake Rollers:
10,000 to 2,550,000 sheets
(in increments of 10,000)
Pick Rollers:
250,000 sheets
Brake Rollers:
250,000 sheets
Vertical Streak Detection
Select whether to enable or disable vertical
streak detection.
Enable to detect vertical streaks (dirt on the
glass) when you perform scanning with the
ADF.
This setting can also be configured with the
operator panel.
Enable/Disable
Disable
Vertical Streak Sensitivity
Specify the sensitivity level to detect vertical
streaks (dirt on the glass) when vertical streak
detection is enabled.
This setting can also be configured with the
operator panel.
Low/Normal/High
Normal
Pick Speed
When multifeeds and paper jams occur
frequently, you may be able to improve the
performance by slowing down the speed in
which documents are picked or fed.
This setting can also be configured with the
operator panel.
Normal/Slow
Normal
AutoCrop Boundary
Specify whether or not to optimize (round up/
down) the fractional part of the scanned image
data.
Optimize/Round Down
Optimize
Item
Description
Parameter/Value
Factory Default