Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7700 Document Scanner User Manual
Page 111
Chapter 5 Daily Care
111
Brake Roller (× 2)
Remove the roller from the scanner.
For details about removing the brake roller, refer to
Gently wipe off any dirt or dust along the grooves, taking care not to
damage the roller surface.
Pick Roller (× 5)
Gently wipe dirt and dust off the roller surface (and along the grooves if
it has grooves) as you rotate the roller by hand, taking care not to
damage the roller surface. Make sure that it is wiped properly because
black residue on the roller will affect the feeding performance.
Plastic Roller (× 2)
Gently wipe off any dirt or dust on the surface of the roller. Make sure
that it is wiped properly because black residue on the rollers will affect
the feeding performance.
Be careful not to damage the sponge that is attached to the roller.
Rubber Roller (× 2)
Gently wipe off any dirt or dust on the surface of the roller. Make sure
that it is wiped properly because black residue on the rollers will affect
the feeding performance.
Chute Roller (× 1)
With the chute roller cover open, gently wipe off any dirt or dust on the
surface of the roller. Make sure that it is wiped properly because black
residue on the roller will affect the feeding performance.
Paper Path (× 2)
Gently wipe the dirt and dust off the surface of the paper path.
Glass (× 2)
Gently wipe the dirt and dust off the surface of the glass sections.
Ultrasonic Sensor (× 2)/Document Sensor (× 8)
Gently wipe the dirt and dust off the surface of the ultrasonic/document
sensors.
ATTENTION
Vertical streaks may appear on the scanned image when the glass is
dirty.
HINT
If it is difficult to clean, use a cotton swab.
Ultrasonic Sensor
Document Sensor