HP UX B6941-90001 - Manual (Page 76)

76 Chapter 2
Installing ITO Agents on the Managed Nodes
General Installation Tips for Managed Nodes
Figure 2-3 Installing the ITO Novell NetWare Agent Package
The ITO GUI Phase
1. Ensure that the Novell NetWare nodes are known to ITO and are
accessible:
2. Transfer
opc_pkg.Z and
unzip.nlm to
NW depot server
(floppy or FTP)
NetWare Depot Server
3. Install NetBasic
4. Unzip opc_pkg.Z
NetWare server 1 NetWare server 2 NetWare server N
ITO Management Server
1. Admin GUI 1st part:
- add NetWare managed nodes
5. Run ITOINST:
install/de-install agent
software on managed
nodes
- run Actions->Install for all
managed nodes; select
Agent Software (ping only)
6. Admin GUI 2nd part:
(template distribution):
- run Actions->Assign
Templates for all managed nodes
- run Actions->Install for all
managed nodes; select every
option except Agent Software