Managed nodes:dec alpha nt, Installation tips for dec alpha nt managed nodes – HP UX B6941-90001 User Manual
Page 61
Chapter 2
61
Installing ITO Agents on the Managed Nodes
General Installation Tips for Managed Nodes
• The installation script checks if the IP address which is used for the
ITO installation is tied to the boot, service, or standby interfaces, and
issues a warning if this is the case. However, the installation proceeds
nonetheless.
• If you select automatic start of ITO agents, the file
/etc/inittab
is
also updated so that the
clinit
entry remains the last one - as is
required by HACMP.
• After successful installation of the ITO agent, the IP alias appears in
the
/var/lpp/OV/conf/OpC/nodeinfo
file in the field
OPC_IP_ADDRESS
.
• The following line is added to the
opcinfo
file during installation
process:
OPC_NAMESRV_LOCAL_NAME
where
is the name of the host configured with the IP
address used for the installation of the ITO agent. If this IP address
changes, this line should be changed accordingly. Note that this line
must be present in order to ensure that the IP address is the same in
the context of both ITO and ANS (ITO’s Advanced Network Security
extension). This ensures that the same hostname is used by all
security functions that require
as their argument (e.g.
secret key generation). If this keyword is not present, ANSE functions
retrieve hostname from the RPC runtime, which is often different
from the hostname used for ITO installation, and the ANSE functions
will fail.
Installation Tips for DEC Alpha NT Managed
Nodes
❏ path names differ only in the architecture name, for example:
•
...ms/intel/nt
•
...ms/alpha/nt
❏ Fileset is: OVOPC-CLT-ENG.OVOPC-ANT-CLT
❏ After entering
Label
and
Hostname
in the
Add Node
window, ITO
looks up and retrieves the following values: