HP UX B6941-90001 - Manual (Page 320)

320 Chapter 7
Integrating Applications into ITO
Integrating Applications into ITO
3. In the Add OV Application window enter the following application
attributes:
Application Name: Ethernet Traffic HP
OV Registration Application Name: IP Graphs
OV Registration Action Identifier: etherTrafficHP
And select [Use Objects selected by Operator] .
4. Click on [OK] .
5. Invoke this application as administrator and as operator:
a. As administrator:
Log out and log in again, to use this OV Application. Select a node
and double-click on the
Ethernet Traffic HP application in
the ITO Application Bank .
Drag and drop this OV application into an operator’s Assigned
Applications window to enable the operator to monitor the
ethernet traffic. (Re-)start the operator’s session.
b. As operator:
Select a node and double-click on the Ethernet Traffic
application in the Application Desktop .
Integrating “IP Activity Monitoring - Tables” as an OV
Service.
1. Working as the administrator, from the menu bar of the root IP Map,
select Window:Application Bank… . The ITO Application
Bank window opens.
2. As administrator, from the menu bar select
Actions:Applications->Add OV Service… . The Add OV
Service window opens.
3. In the Add OV Service window enter the following application
attributes:
Application Name: IP Monitoring - Tables
OV Registration Application Name: IP Tables
4. Click on [OK] .
5. Invoke this application as administrator and as operator: