HP UX B6941-90001 - Manual (Page 29)

Chapter 1 29
Prerequisites for Installing ITO Agent Software
Managed Node Requirements
Managed Node Requirements
To prepare for the installation of ITO on the managed nodes, make sure
that the chosen managed nodes satisfy the following hardware and
software requirements. This section is split into the following sections:
• Hardware requirements
• Software requirements
Hardware Requirements
This section explains what hardware requirements exist for given agent
platforms.
Novell NetWare Hardware Requirements
The Novell NetWare systems you select as managed nodes must meet
the following hardware requirements:
• Novell NetWare 4.1 Server or higher (Novell SMP is not supported)
• 10 MB disk space on each NetWare server in the SYS: volume
• 20 MB disk space for the software depot on the NetWare depot server
in the SYS:volume
• 7 MB additional free RAM on the NetWare server (4 MB for the ITO
agent, 1 MB for TI-RPC, and 0.5 to 2 MB for the NetWare
Management Agent and XCONSOLE). At least 32 MB of server RAM
is suggested for fair performance.
• 16 MB additional free RAM for the ITO agent if you are using
NetWare SFT III file servers
OS/2 Hardware Requirements
The OS/2 systems you select as managed nodes must meet the following
hardware requirements:
❏ 10 MB disk space free
(About 20 MB required during software installation.)