Monitoring objects in the windows nt performance m – HP UX B6941-90001 User Manual
Page 254
254
Chapter 5
Configuring ITO
Preconfigured Elements
a. Requires TME NetFinity; see “Software Requirements for OS/2 Managed Nodes” on
b. Used with the scheduled action
Multiple external monitors
.
c. Requires external monitors to be configured for each process.
Monitoring Objects in the Windows NT Performance
Monitor
The ITO Threshold Monitor can be configured to monitor objects in the
Windows NT Performance Monitor.
To monitor Windows NT objects, set the Monitor to
Program
, then in the
Monitor Program or MIB ID
field, enter
NTPerfMon\\
. This
case-sensitive designator should preface all requests to the NT
performance monitor. The syntax for requests is shown in Figure 5-2 on
page 255, and explained below.
snmpd_mon_ext
External monitor for Snmpd
0.5
schedule
action
dependent
mib2_mon_ext
External monitor for Mib_2
0.5
schedule
action
dependent
Multiple
external
monitors
c
Scheduled action that checks which
processes are running
N/A
5m
Object
Description
Threshold
Polling
Interval
(mins)