HP UX B6941-90001 - Manual (Page 324)

324 Chapter 7
Integrating Applications into ITO
Integrating Applications into ITO
b. Select [No Window] (for example, X Application) from the option
button.
c. Click on [OK] .
4. Select again the application labeled ITO Status from the
Application Bank .
5. Copy this application using Actions:Application->Copy and
modify it to become the ITO Agents Stop application:
a. Change the attributes as follows:
Application Name: ITO Agents Stop
Description: Stopping of ITOAgents
Application call:
/opt/OV/bin/OpC/opcragt -stop $OPC_NODES
Start on Target Node List: leave field empty
Executing user: root
Password: leave field empty
b. Select [No Window] (for example, X Application) from the option
button.
c. Click on [OK] .
6. Assign the new applications to the appropriate users.
Integrating Applications as Broadcast
Commands
Applications can be launched on several systems at the same time using
the ITO broadcast command facility in the Application
Desktop/Application Bank.
The application must be accessible via the executing user’s $PATH
settings on UNIX systems, or the path must be fully qualified on the
Broadcast Command window. Note that the application must be
available on the managed node.
You can also distribute simple and widely used applications via ITO to
managed nodes as explained in “Distributing the ITO Agent
Configuration to the Managed Nodes” on page 305.