HEIDENHAIN iTNC 530 (60642x-04) - Manual (Page 680)

680 MOD Functions
1
7.6 Ether
n
et int
e
rf
ace
Connecting the iTNC directly with a Windows PC
You can connect the iTNC directly to a PC that has an Ethernet card.
Let a network specialist enter the settings. The IP address of your PC
may need to be changed to that of the iTNC.
Prerequisite:
The network card must already be installed on the PC and
ready for operation.
If the PC that you want to connect the iTNC to is already
integrated in your company network, then keep the PC’s
network address and adapt the TNC’s network address
accordingly (see "Configuring the TNC" on page 673).