HEIDENHAIN iTNC 530 (60642x-04) - Manual (Page 293)

HEIDENHAIN iTNC 530 293
7.1 Pr
ocessing DXF files (sof
tw
ar
e option)
Element information
At the bottom left of the screen, the TNC displays the coordinates of
the machining position that you last selected via mouse click in the left
or right window
Undoing actions
You can undo the four most recent actions that you have taken in the
mode for selecting machining positions. The following icons are
available:
Mouse functions
Use the mouse for magnifying and reducing as follows:
 Define the zoom area by dragging the mouse with the left button
depressed
 If you have a wheel mouse, you can use it to zoom in and out. The
zooming center is the location of the mouse pointer
 Click the magnifying glass icon or double-click with the right mouse
button to reset the view to the default setting
You can move the current view by depressing the center mouse
button.
If 3-D mode is active, you can rotate and tilt the view by depressing
the right mouse button.
Function Icon
Undo the most recently conducted action
Repeat the most recently conducted action