Enterasys Networks CSX6000 - Manual (Page 716)

USER’S GUIDE
716 CyberSWITCH
81 51 invalid call reference value
Indicates that the remote equipment has received a call with a call
reference that is not currently in use by the device-network interface.
82 52 identified channel does not exist
Indicates that the receiving equipment has been requested to use a
channel that is not activated on the interface for calls.
83 53 a suspended call exists, but this call identity does not
Indicates that the network received a call resume request. The call
resume request contained a Call Identity information element which
indicated that it is in use for a suspended call.
84 54 call identity in use
85 55 no call suspended
Indicates that the network received a call resume request when there
was not a suspended call pending. This may be a transient error that
will be resolved by successive retries.
86 56 call having the requested call identity has been cleared
Indicates that the network received a call resume request. The call
resume request contained a Call Identity information element which
once indicated a suspended call; however, that suspended call was
cleared either by time-out or by the remote device.
88 58 incompatible destination
Indicates that an attempt was made to connect to non-ISDN
equipment; for example, to an analog line.
89 59 non-existent abbreviated address entry
90 5A remote device initiated 1 TR6
91 5B invalid transit network specified
Indicates that the ISDN exchange was asked to route the call through
an intermediate network that is unrecognized.
92 5C invalid facility parameter
93 5D mandatory information element is missing
95 5F invalid message unspecified
Indicates that an invalid message was received and that no standard
cause applies. D-channel error. If this error is returned
systematically, report the occurrence to your authorized service
provider.
96 60 mandatory information element is missing
Indicates that the receiving equipment received a message that did
not include one of the mandatory information elements. D-channel
error. If this error is returned systematically, report the occurrence to
your authorized service provider.
Dec Value Hex Value Q.931 Cause