The isolated mode, Configuring the isolated mode, Isolated mode configuration elements – Enterasys Networks CSX6000 User Manual
Page 289: Isolated mode background information, Static route lookup via radius, Configuring static route lookup via radius, The isolated mode 289, Static route lookup via radius 289, Configuring static route lookup via radius 289, Enable/disable isolated mode option
Central Site Remote Access Switch 289
C
ONFIGURING
A
DVANCED
IP R
OUTING
The Isolated Mode
T
HE
I
SOLATED
M
ODE
C
ONFIGURING
THE
I
SOLATED
M
ODE
U
SING
CFGEDIT
1.
Select Isolated Mode (Enable/Disable) from the IP menu.
2.
Follow the onscreen instructions to either enable or disable the isolated mode.
I
SOLATED
M
ODE
C
ONFIGURATION
E
LEMENTS
I
SOLATED
M
ODE
S
TATUS
You may enable or disable the Isolated Mode option.
I
SOLATED
M
ODE
B
ACKGROUND
I
NFORMATION
When operating with isolated mode enabled, the CyberSWITCH does not relay IP datagrams
received from the WAN to other IP routers/hosts located on the WAN. IP datagrams received from
the WAN will be discarded if they need to be forwarded over the WAN. IP datagrams received on
the LAN interface are forwarded to each required interface.
WAN-to-LAN and LAN-to-LAN routing still works if Isolated Mode is enabled.
S
TATIC
R
OUTE
L
OOKUP
VIA
RADIUS
Note:
This option is only applicable when a RADIUS Server is in use.
C
ONFIGURING
S
TATIC
R
OUTE
L
OOKUP
VIA
RADIUS
U
SING
CFGEDIT
1.
Select Static Route Lookup via RADIUS (Enable/Disable) from the IP menu.
2.
Follow the onscreen instructions to either enable or disable this feature.
U
SING
M
ANAGE
M
ODE
ipradius
Displays the current enabled status of the IP route lookup via RADIUS feature.
ipradius off
Disables the lookup of IP routes lookup via RADIUS.
ipradius on
Enables the lookup of IP routes lookup via RADIUS.