Enterasys Networks CSX6000 - Manual (Page 582)

USER’S GUIDE
582 CyberSWITCH
If there was enough memory for all connections, the connection table would reflect both
potential and actual connections as the same number.
wan stats
Displays the current system WAN connection statistics. Refer to WAN Statistics , for a list of
available statistics and their definitions.
From the “Connection Monitor” screen you can press:
To select a site that is currently connected.
To view throughput monitoring for the selected site. Refer to the section titled Viewing
Throughput Information, for details.
To exit the Connection Monitor screen.
V IEWING T HROUGHPUT I NFORMATION
The Throughput Monitor screen displays the system throughput monitoring feature in action. To
enter this screen:
1. Issue the mc command to display the connection monitor screen.
2. Use the to move the cursor down to the specific site for which you would like to
view throughput information.
3. Press to display the throughput monitor screen for that site.
Throughput monitoring information can be very useful for fine-tuning your bandwidth
configuration parameters. Note that this feature is not available through a Telnet session. Refer to
the
Configuring Call Control chapter for a complete description of throughput parameters.
The actual bandwidth utilization, along with the current underload setting, is displayed for each
throughput sample. After 32 samples are displayed, the newest sample is displayed at position 32
and all other samples are shifted left one position.