Enterasys Networks CSX6000 - Manual (Page 336)

USER’S GUIDE
336 CyberSWITCH
IPX N ET W ARE S TATIC S ERVICES C ONFIGURATION E LEMENTS
S ERVICE N AME
Specifies the NetWare service name that is the target of this static service definition. This parameter
is a 48 character NetWare service name.
S ERVICE T YPE
Indicates the type of NetWare service that is the target of this static service definition. You may
enter the hexadecimal service type value, or request a list of common service types. Some common
NetWare service types are
•
0x0004 File Server
• 0x0005 Job Server
• 0x0007 Print Server
• 0x0009 Archive Server
• 0x0047 Advertising Print Server
• 0xFFFF All Services
IPX N ETWORK N UMBER
The IPX network number where the service is located. This parameter is a hexadecimal value from
1 to 4 bytes in length.
IPX N ODE N UMBER
The IPX node number of the NetWare device where the service is located. This parameter is a
hexadecimal value 6 bytes in length.
IPX S OCKET N UMBER
The IPX socket number where the service is located. This parameter is a hexadecimal value 2 bytes
in length. Some common IPX Socket numbers are:
•
0x0451 NetWare Core Protocol (File Server)
• 0x0452 Service Advertising protocol
• 0x0453 Routing Information protocol
• 0x0455 NetBIOS Protocol
• 0x0456 Diagnostic packet
• 0x0457 Serialization Packet
N UMBER OF H OPS
Indicates the number of routers that are traversed in order to reach this Service. This number is
used to calculate the best route to the destination Service when multiple routes exists. This
parameter is a decimal value from 1 to 15.
SAP P ROPAGATION
Indicates how the system will advertise the NetWare Service defined by this static service entry. If
you choose “Do not Propagate”, the system will not advertise this service table entry at any time.
If you choose “Always Propagate”, the system will advertise this service table entry as part of the
normal service table advertisement protocol processing. If you choose “Propagate only when the
Next Hop is connected”, the system will only advertise this route table entry if the destination
network is reachable over the WAN and the next hop device for the route entry is actively
connected to the system.