Enterasys Networks CSX6000 User Manual
Page 490
USER’S GUIDE
490 CyberSWITCH
Call Restrictions have been enabled by user command
The user has enabled Call Restrictions via the
callrest on
Dynamic Management command.
Call Restriction statistics reset for new day
Call Restriction device information.
Call Restriction statistics reset for new month
Call Restriction device information.
Call Restrictions will allow calls to be made this hour
Call Restriction device information.
Call Restrictions will allow calls, but this hour is restricted
Calls are restricted during this hour but the action configured is to “Warn”. Calls are still being
allowed.
Call Restrictions will allow calls to be made
A Call Restriction limit has been exceeded but calls will still be allowed.
Call Restrictions will no longer allow calls to be made
A Call Restriction limit has been exceeded and calls will no longer be allowed. Existing calls will
NOT be forced down.
Call Restrictions will not allow calls to be made this hour
Call Restriction device information.
Call Summary for
month.
Cannot make Bridge Dial Out call. No device found.
Check configuration to insure that device is properly configured.
Can only do SPEECH and 3.1K AUDIO calls in HOST_CALL_REQUEST
An improper outgoing call was attempted on an RBS line. Ensure that the device that is being called
is a digital modem device and ensure that the “dm” flag has been added to peer calls.
Can’t call Dial Out User. Security is not Device Level.
Check configuration. Bridge Dial Out requires device-level security and a properly configured
Device List.
Can’t start offnode server lookup of Dial Out User.
CyberSWITCH unable to send out a request to the off-node server. One of two possibilities: there
may be problems communication on the LAN, or the server may not be configured properly. Verify
LAN connectivity with server, and then check to see if server configured properly.
Calls Active
xx Active Sites
Current number of sites connected.