Enterasys Networks CSX6000 - Manual (Page 378)

USER’S GUIDE
378 CyberSWITCH
5. Under ISDN information, enter the profile information. This is a profile name you configured
in the previous section. Remember from the previous section that each configured profile
reserves specific lines. By assigning this profile to the device, you are reserving specific lines
for this device.
To enable the bandwidth reservation feature:
1. Return to the Options Menu (selection 2 of the main menu).
2. Select Bandwidth Reservation.
3. Follow the onscreen instructions to enable the feature.
U SING M ANAGE M ODE
profile
Displays the current profile table.
profile [add] [change] [delete]
Allows you to add, change or make deletions from the current profile table.
bwres [on] [off]
System-level command which enables/disables the bandwidth reservation feature.
device [add] [change] [delete]
Allows you to assign a device to a profile.
B ANDWIDTH R ESERVATION C ONFIGURATION E LEMENTS
D EFAULT P ROFILE
The Default Profile is the available profile for all valid devices not identified with a specific device
profile. The Default Profile initially contains all of the BRI lines configured in the Physical
Resources section of CFGEDIT. When data lines are added, changed or deleted through CFGEDIT’s
Physical Resources section, they are automatically added, changed or deleted in the Default Profile.
The Default Profile entry cannot be deleted, nor have its name changed. However, it may be mod-
ified to remove lines from general usage.
D EVICE P ROFILE
The Device Profile entry identifies which line or lines are reserved for a particular profile. The
profile name must be a string of 1 to 17 alphanumeric characters, including the underscore. When
selecting a name for a Device Profile, select a name that appropriately identifies the profile (such as
Central Office).
L INE
This element identifies the line or lines to be reserved for the specified Device Profile. Overlap of
lines between profiles is allowed. Note that this is a BRI-only feature since bandwidth is reserved
per-line.