Enterasys Networks CSX6000 - Manual (Page 573)

Central Site Remote Access Switch 573
R EMOTE M ANAGEMENT
Carbon Copy
The system will prompt you for a password. The default password set on each CyberSWITCH
is “CC”. We recommend that you change this password on each CyberSWITCH using the
CCINSTAL program.
7. Type: cc
(or if the password has been changed)
If connection with the CyberSWITCH is successful, then the system will remove the Carbon
Copy screen. An active administration session now exists with the CyberSWITCH.
If connection with the CyberSWITCH is not successful, then the system will return an error
message in approximately 60 seconds. Check the cable connections, phone number, and
password. If the connection with the CyberSWITCH is still unsuccessful, report the problem by
using the procedures defined in
Getting Assistance .
T ERMINATING A R EMOTE A DMINISTRATION S ESSION
This section tells you how to terminate a remote administration session from the administration
console PC. You may need this information if you want to make changes to an CyberSWITCH, and
then use the same administration console PC to access a different CyberSWITCH.
1. Return to the Carbon Copy command screen.
Press: (at the same time)
This will return the user to the Carbon Copy main screen. In the lower right hand corner, the
following commands will be displayed. This command menu is function-key driven.
2. Choose “ Terminate Link ” from the Carbon Copy command menu. Press:
3. Carbon Copy will ask if you really want to terminate the link. To answer yes, press:
4. Choose “ Return to Application ” from the Carbon Copy command menu. Press:
Press:
Performing a File Transfer Using CARBON COPY
After a successful Carbon Copy logon, the lower right hand corner may contain the Carbon Copy
menu. If the menu is not present, display it by pressing the and keys
simultaneously.
[F1] Terminate Link
[F3] Capture Screen/Session
[F4] Review/Replay Captured Image
[F5] File Transfer Package
[F6] Printer/LOG/DOS Control
[F8] Data Link Maintenance
[F9] Repaint Screen & Return
[F10] Return to Application