Enterasys Networks CSX6000 - Manual (Page 340)

USER’S GUIDE
340 CyberSWITCH
Some of these packets are overloaded in that they are not just keep-alive packets but are
control packets needed for the application to run successfully and hence have to be routed like
regular SPX data packets. If any NetWare application does not seem to work across WANs, it may
be because of the mishandling of these packets and can be traced by disabling SPX keep-
alive spoofing.
This above described implementation is followed for keep-alive packets received over the LAN and
the WAN. If a keep-alive is received over the WAN and it is determined that a spoofed keep-alive
should be generated, it will be returned over the same WAN connection on which it was received.
The parameters for SPX spoofing are configured for each device. The SPX spoofing option can be
enabled or disabled. By default the option is enabled. When disabled the SPX keep alives are routed
without any special handling. If the option is enabled the SPX spoofing duration time T is specified
in minutes. The default is set to 120 minutes.
IPX T
YPE
20 P
ACKET
H
ANDLING
C ONFIGURING IPX T YPE 20 P ACKET H ANDLING
U SING CFGEDIT
1. Press 8 from the IPX menu to configure IPX type 20 packet handling. The following screen will
be displayed:
2. Press 1 to enable IPX type 20 packet WAN forwarding. Follow the onscreen instructions to
complete the enable process. Return to the IPX type 20 handling menu.
3. Press 2 to add IPX type 20 packet WAN forwarding devices.
a.
Press 1 to add a device.
b. Enter the device’s name.
c. From the displayed list, select an IPX type 20 packet forward control method.
U SING M ANAGE M ODE C OMMANDS
ipxt20
Allows you to configure IPX type 20 information.
IPX T YPE 20 P ACKET H ANDLING C ONFIGURATION E LEMENTS
IPX T YPE 20 P ACKET H ANDLING S TATUS
You may enable or disable IPX type 20 packet WAN forwarding. When it is enabled, you may
specify devices that can use this feature.
IPX Type 20 Packet Handling Menu:
1) IPX Type 20 Packets WAN Forwarding (Enable/Disable)
2) IPX Type 20 Forwarding Devices.
Select function from above or for previous menu: