Udp statistics, Wan fr_ietf statistics, Udp statistics 658 wan fr_ietf statistics 658 – Enterasys Networks CSX6000 User Manual
Page 658: Udp s, Wan fr_ietf s
USER’S GUIDE
658 CyberSWITCH
UDP S
TATISTICS
If the IP operating mode is enabled, you can access the following UDP statistics by using the
udp
stats
command:
udpInDatagrams
The total number of UDP datagrams delivered to UDP devices.
udpInErrors
The number of received UDP datagrams that could not be delivered for reasons other than the lack
of an application at the destination port.
udpNoPorts
The total number of received UDP datagrams for which there was no application at the destination
port.
udpOutDatagrams
The total number of UDP datagrams sent from this system.
WAN FR_IETF S
TATISTICS
You can access FR_IETF statistics by issuing the
wan fr-ietf stats [device/
fr_accessname_dlci] [prot]
console command.
Protocol
The line protocol of the packets transmitted or received.
Frames Sent
The number of frames sent for the indicated protocol.
Octets Sent
The number of octets sent for the indicated protocol.
Send Errors
The number of transmission errors for the indicated protocol.
Frames Received
The number of frames received for the indicated protocol.
Octets Received
The number of octets received for the indicated protocol.
Receive Errors
The number of errored frames received for the indicated protocol.