Enterasys Networks CSX6000 - Manual (Page 409)

Central Site Remote Access Switch 409
C ONFIGURING O THER A DVANCED O PTIONS
Log Options
The duration is calculated by subtracting the connect event time from the disconnect time.
Example:
Chicago-Schaumburg 00000001 DISCONNECT 1 OF 4 MonroeCounty PORT 1/1/1
Chicago-Schaumburg 00000001 DISCONNECT 2 OF 4 IN FROM 3135551212
Chicago-Schaumburg 00000001 DISCONNECT 3 OF 4 64Kb 08/28/97 23:11:55
Chicago-Schaumburg 00000001 DISCONNECT 4 OF 4 DURATION 01:11:55
Reject Event Report Contents
On a reject event, records 1 through 4 are used. The event type is REJECT. The timestamp reflects
the time that the decision to disconnect was made. An incoming phone number is displayed if it is
provided by the telephone switch. Not all switches provide calling line identification. A phone
number is always displayed for outbound calls.
The duration is calculated by subtracting the ISDN connection timestamp (the time that the ISDN
connect message was received from the switch) from the reject event timestamp.
Example:
Chicago-Schaumburg 00000001 REJECT 1 OF 4 UNKNOWN PORT 1/1/1
Chicago-Schaumburg 00000001 REJECT 2 OF 4 IN FROM 3135551212
Chicago-Schaumburg 00000001 REJECT 3 OF 4 64Kb 08/28/97 23:11:55
Chicago-Schaumburg 00000001 REJECT 4 OF 4 DURATION 00:00:07
Term Succ Event Report Contents
On a Term Succ event, records 1 through 3 are used. The event type is TERM SUCC. The time stamp
represents the time at which the user level authentication succeeded. The port, call direction and
phone number information are the same as for a Term Conn event.
Example:
Chicago-Schaumburg 00000001 TERM SUCC 1 OF 3 UNKNOWN PORT 1/1/1
Chicago-Schaumburg 00000001 TERM SUCC 2 OF 3 IN FROM 3135551212
Chicago-Schaumburg 00000001 TERM SUCC 3 OF 3 64Kb 06/16/98 23:11:55
Term Fail Event Report Contents
On a Term Fail event, records 1 through 3 are used. The event type is TERM FAIL. The time stamp
represents the time at which the user authentication failed. The PORT, call direction and phone
number information are the same as for a Term Conn event.
Example:
Chicago-Schaumburg 00000001 TERM FAIL 1 OF 3 UNKNOWN PORT 1/1/1
Chicago-Schaumburg 00000001 TERM FAIL 2 OF 3 IN FROM 3135551212
Chicago-Schaumburg 00000001 TERM FAIL 3 OF 3 64Kb 06/16/98 23:11:55
System Up Event Report Contents
On a System Up event, only record 1 is used. The event type is SYSTEM UP. No data is filled in for
the Remote Device Name field or the Port field.