Enterasys Networks CSX6000 - Manual (Page 121)

Central Site Remote Access Switch 121
C ONFIGURING R ESOURCES AND L INES
Lines
care that the idle character is set to a value that the receiving device will understand. For
example, CISCO devices require the flag data line idle character.
C ONFIGURING C HANGES FOR A COMMPORT R ESOURCE
1. Select Change from the Data Lines menu of Physical Resources.
2. Select ASYNCDMPORT.
3. You will be prompted to accept the default or provide new information for the following:
a.
baud rate
b. data bits
c. stop bits
d. parity value
e.
flow control type
f. mode:
•
Autosense (default): can be either terminal or PPP-async. Requires user interaction
(four carriage returns) to get to terminal mode.
• Term: terminal mode only. Login prompt automatically sent to remote console.
U SING M ANAGE M ODE C OMMANDS
line
Displays the current line configuration.
datalink
Display the current data link configuration.
datalink add
Allows you to add a data link. The following sample screen shows how a data link is added.
datalink change
Changes an existing data link.
Current LINE Configuration:
id LINE NAME TYPE SLOT PORT
--------------------------------------------------------------------------------
1 LINE.BASICRATE1 BR_ISDN 1 1
2 LINE.BASICRATE2 BR_ISDN 1 2
3 DMS100.LINE1 BR_ISDN 2 1
Select line id for new data link or press to cancel: 3
Automatic TEI negotiation (Y or N) [default = Y]? N
TEI value [default = 1]?
Service Profile ID (enter 0 for no SPID)
[default = NO SPID]? 13135551212
Directory number [default = 13135551212]? 5551212
Number of digits to verify [default = 7]?
The DATALINK configuration has been updated successfully.