Ipx routing option, Enabling/disabling ipx, Ipx option configuration element – Enterasys Networks CSX6000 User Manual
Page 323: Ipx routing option 323, Ipx r
Central Site Remote Access Switch 323
C
ONFIGURING
IPX
IPX Routing Option
IPX R
OUTING
O
PTION
E
NABLING
/D
ISABLING
IPX
Note:
The CyberSWITCH does not currently provide IPX data transfer over X.25 links.
U
SING
CFGEDIT
1.
Select Options from the main menu.
2.
Select IPX Routing from the Options menu. The following menu will be displayed:
3.
As illustrated on the sample screen above, follow the onscreen instructions to enable IPX
routing. The following extended IPX menu will be displayed:
You will use this menu to complete the IPX configuration.
IPX O
PTION
C
ONFIGURATION
E
LEMENT
S
TATUS
IPX can be either enabled or disabled, with disabled being the default. If the option is set to enable,
the system will process and forward IPX data packets at the IPX network layer. If the option is set
to disable, the system will process and forward IPX data packets at the MAC or bridging layer.
IPX Menu:
1) IPX Routing (Enable/Disable)
Select function from above or
The IPX Routing feature is currently DISABLED.
Do you wish to ENABLE the IPX feature (Y or N) [default = N]? Y
The IPX Routing feature is currently ENABLED.
Press any key to continue.
IPX Menu:
1) IPX Routing (Enable/Disable)
2) IPX Internal Network number
3) IPX Interfaces
4) Routing Protocols (Enable/Disable)
5) IPX Static Routes
6) NetWare Static Services
7) IPX Spoofing Information
8) IPX Type 20 Protocol
9) Isolated mode (Enable/Disable)
10) Triggered RIP/SAP
Select function from above or