Enterasys Networks CSX6000 - Manual (Page 488)

USER’S GUIDE
488 CyberSWITCH
[AUTH] Warning code: 0010 Received unexpected authentication response code from server
A message was received from an authentication server that contained an invalid response message
identifier.
[AUTH] Warning code: 0011 An unexpected server responded to the access request
An access response message was received from an authentication server that is not configured in
the System.
[AUTH] Warning code: 0012 UDP call back processed with no data present
A message was received from an authentication server that contained zero data bytes.
Bad auth result in smgrauth_aa_notify for device
There was no device configured (on-node or in CSM) for the login id entered at the user-level
security prompt in the terminal server interactive window. Check configuration.
Bad context on SccDatInd
Indicates a problem has occurred in forwarding frames from the hardware to the frame relay
software. The intended context for this frame is specified by the indicated context value. Contact
your Distributor or Customer Support.
Bad context on X25SccDatInd
A data packet has been received with an incorrect context. This indicates that the system allocation
of SCC controllers is not in a consistent state. Restart the system.
Bad FR Frame Size =
Indicates that a frame was received with an invalid length size. Contact your Distributor or
Customer Support.
Baud Rate is bps
The Autobaud procedure has terminated and the RS232 port has been set to the specified baud rate.
[BIF] Could not allocate memory for buffer queue
[BIF] Initialization failed
These messages appear together in the report log. They indicate that an error occurred during
initialization of the Bridge Local Interface (which is required for IP Host mode). If these messages
are present in the log, the system will not operate correctly. Please contact your Distributor or
Customer Support.
Booting System Software
The Second Stage Boot is attempting to load and execute the System software.
Bootstrap came alive on DM card in slot
Informational message stating that the initialization of the Digital Modem card was successful.
Bootstrap came alive on WAN card in slot
Informational message during a successful system initialization. Download process update for
WAN card in slot . This should be reported after the “Bootstrap loaded...waiting for
response” message for a given adapter.
Bootstrap loaded on WAN card in slot , waiting for response...
Informational message during a successful system initialization. The first of three messages
providing the download process status for WAN card in slot .