Monthly call charge configuration elements, Monthly call charge background information, Call restrictions – Enterasys Networks CSX6000 User Manual
Page 372: Configuring call restrictions, Call restrictions 372, Configuring call restrictions 372, Configuring call restriction parameters
USER’S GUIDE
372 CyberSWITCH
M
ONTHLY
C
ALL
C
HARGE
C
ONFIGURATION
E
LEMENTS
S
TATUS
Allows you to enable or disable the monthly call charge option.
M
AXIMUM
M
ONTHLY
C
HARGE
The maximum monthly charge value. The legal values are from 1 to 10,000,000. This value is
specified according to the country’s currency.
A
CTION
Select the action to be taken if the maximum monthly call charge is exceeded. The Stop Calling
action will cause the system to stop initiating switched calls. Dedicated connections and incoming
calls will continue to operate normally. The continue calling action will cause the system to
continue making calls even after the maximum monthly charge is exceeded.
M
ONTHLY
C
ALL
C
HARGE
B
ACKGROUND
I
NFORMATION
Currently, this feature is only supported on connections to NTT, NET5, and 1TR6 switches. The
“Advice of Charge” information element delivered by the switches are required to track phone call
charges.
When the Monthly Call Charges option is enabled, phone call charges are tracked by the system. If
the total call charges exceed this configured maximum during the month, the configured action will
be taken. At the beginning of a new month, the current total call charges will be reset to 0.
The LCD panel displays the current total call charges for the month. If the configured maximum
call charges are exceeded, the system reports a message and the configured action is taken. Refer to
the
chapter for a listing of the associated LCD messages.
C
ALL
R
ESTRICTIONS
C
ONFIGURING
C
ALL
R
ESTRICTIONS
Note:
Certain restrictions apply to the use of
Call Restrictions and Semipermanent Connections
.
Refer to the Background Information discussion.
U
SING
CFGEDIT
1.
Select Call Restrictions from the Call Control Options menu.
2.
Follow the onscreen instructions for enabling this feature.
3.
The current call restriction configuration will be displayed.
4.
Enter the number Id associated with the parameter you want to change.
5.
Follow the onscreen instructions for changing the parameter.