Enterasys Networks CSX6000 - Manual (Page 496)

USER’S GUIDE
496 CyberSWITCH
[DHCP-P] Ignoring offers from DHCP server x.x.x.x; the server MUST be on a primary LAN interface, or
IP addresses will not be obtained
In order for the DHCP proxy client to successfully obtain IP addresses for multiple interfaces, the
DHCP server must reside on a primary LAN interface. If it does not, this message is written to the
Report Log, and no IP addresses will be obtained from the server and placed into the IP Address
Pool. To correct, use CFGEDIT to change the DHCP server’s interface from a secondary interface
into a primary interface for that LAN port.
[DHCP-P] Invalid DHCP Server LAN port encountered in configuration; NIF entry not activated
This message appears when the DHCP Proxy Client encounters an invalid configuration setting for
an IP network interface’s LAN port on which the DHCP server is to be reached. This will result in
no IP addresses being obtained for the network interface in question. Contact your Distributor or
Customer Support.
[DHCP-P] Proxy Client disabled
This message indicates that the DHCP Proxy Client has been successfully disabled. This message
will appear after the DHCP Proxy Client has been disabled from Manage Mode.
[DHCP-P] Proxy Client enabled
This message will appear whenever the DHCP Proxy Client has been successfully enabled. This
could be during system initialization (if configuration values have enabled it), or after the DHCP
Proxy Client has been enabled from Manage Mode.
[DHCP-P] Proxy Client initialization failed
This message indicates that the DHCP Proxy Client did not initialize successfully. The DHCP Proxy
Client will not be operational. Contact your Distributor or Customer Support.
[DHCP-P] UDP port (67) closed
The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPS UDP
port (port 67). If the DHCP Relay Agent is enabled, the BOOTPS port must remain open. If this is
the case, the DHCP Proxy Client will not close the UDP port.
[DHCP-P] UDP port (67) opened
The DHCP Proxy Client is being enabled and it must open the BOOTPS UDP port (port 67). This
may occur during system initialization, or after the DHCP Proxy Client has been enabled from
Manage Mode. If the DHCP Relay Agent is also enabled, it may not be necessary for the Proxy
Client to open this UDP port.
[DHCP-P] UDP port (68) closed
The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPC UDP
port (port 68).
[DHCP-P] UDP port (68) opened
The DHCP Proxy Client is being enabled and it must open the BOOTPC UDP port (port 68). This
may occur during system initialization, or after the DHCP Proxy Client has been enabled from
Manage Mode.
[DHCP-R] Failed to allocate memory for transmit buffer pool
The system was unable to allocate memory for the DHCP Relay Agent’s transmit buffer pool
during initialization. The Relay Agent will not become operational. Contact your Distributor or
Customer Support.