Log options configuration elements, Log options configuration elements 401 – Enterasys Networks CSX6000 User Manual
Page 401
Central Site Remote Access Switch 401
C
ONFIGURING
O
THER
A
DVANCED
O
PTIONS
Log Options
2.
Configure a Syslog Server:
a.
Select Log Servers. (Note that upon selection, no configuration is needed for a local log file.
The local log file name is preconfigured.)
b.
Select Add a Syslog Server.
c.
Enter the Syslog Server IP address using dotted decimal notation.
d. Enter the UDP port number for the Syslog Server.
e.
Return to Log Options Menu.
3.
Identify which reports should be sent to which server:
a.
From Log Options, select Call Detail Recording.
•
Press <1> to select an active server to which the CDR log reports should be sent.
•
From the displayed list, enter the ID of the log file you wish to use.
•
Enter the decimal UNIX priority value.
b.
From Log Options, select System Message (DR) log.
•
Press <1> to select an active server to which the System Message log reports should be sent.
•
From the displayed list, enter the ID of the log file you wish to use.
•
Enter the decimal UNIX priority value.
c.
From Log Options, select Authentication Message (DA) log.
•
Press <1> to select an active server to which the Authentication Message log reports should
be sent.
•
From the displayed list, enter the ID of the log file you wish to use.
•
Enter the decimal UNIX priority value.
U
SING
M
ANAGE
M
ODE
C
OMMANDS
log options
Displays the Log Options menu. The configuration screens are identical to those displayed by
CFGEDIT. Refer to the above section for instructions.
L
OG
O
PTIONS
C
ONFIGURATION
E
LEMENTS
Note
:
The local log file path and file name is preconfigured for your system; no configuration
elements are entered for a local log file. Configuration elements are only needed for Syslog
Servers.
IP A
DDRESS
The IP address of the Syslog Server using dotted decimal notation; 0.0.0.0 and 255.255.255.255 are
not allowed. The Syslog Server must be accessible via a LAN connection (and not a WAN
connection).
Log Options Menu:
1) Log Servers
2) Call Detail Recording
3) System Message (DR) log
4) Authentication Message (DA) log
Select function from above or