Enterasys Networks CSX6000 - Manual (Page 646)

USER’S GUIDE
646 CyberSWITCH
icmpOutErrors
The number of ICMP messages that this system did not send due to problems discovered within
ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP
layer such as the inability of IP to route the resultant datagram. In some implementations there may
be no error types that contribute to this counter’s value.
icmpOutDestUnreachs
The number of ICMP Destination Unreachable messages sent.
icmpOutTimeExcds
The number of ICMP Time Exceeded messages sent.
icmpOutParmProbs
The number of ICMP Parameter Problem messages sent.
icmpOutSrcQuenchs
The number of ICMP Source Quench messages sent.
icmpOutRedirects
The number of ICMP Redirect messages sent. For a host, this will always be zero, since hosts do not
send redirects.
icmpOutEchos
The number of ICMP Echo (request) messages sent.
icmpOutEchoReps
The number of ICMP Echo Reply messages sent.
icmpOutTimestamps
The number of ICMP Timestamp (request) messages sent.
icmpOutTimestampReps
The number of ICMP Timestamp Reply messages sent.
icmpOutAddrMasks
The number of ICMP Address Mask Request messages sent.
icmpOutAddrMaskReps
The number of ICMP Address Mask Reply messages sent.
IPX S
TATISTICS
You can access the following types of IPX statistics: general, RIP and triggered RIP, SAP and
triggered SAP and IPX spoofing. The sections below provide information for each category.
IPX G ENERAL S TATISTICS
You can access IPX general statistics by using the ipx stats console command. IPX general
statistics include basic and advanced system table statistics.