Configuring user level databases, Overview, User level authentication database location – Enterasys Networks CSX6000 User Manual
Page 205: Configuring authentication database location, Configuring user level databases 205, Configuring user level database, Onfiguring, Evel, Atabases
C
ONFIGURING
U
SER
L
EVEL
D
ATABASES
O
VERVIEW
User level security is an authentication process between a specific user and a device. The
authentication process is interactive; users connect to a terminal server and need to interact with it
in order to communicate with other devices beyond the server. The CyberSWITCH supports user
level security through the RADIUS, TACACS, or ACE Server.
This chapter provides information for enabling an off-node user level database. Refer to the chapter
Configuring Off-node Server Information
for configuration instructions for specific servers.
U
SER
L
EVEL
A
UTHENTICATION
D
ATABASE
L
OCATION
C
ONFIGURING
A
UTHENTICATION
D
ATABASE
L
OCATION
U
SING
CFGEDIT
1.
Select Security from the main menu.
2.
Select option (4), User Level Databases (Enable/Disable) from the Security Menu. The following
screen be displayed:
3.
Select the option you wish to configure and press
If you select a server that is currently enabled, the system will prompt you to disable it. If you
select a server that is currently disabled, follow the onscreen instructions to enable the server,
including entering the Telnet port number for the server. If you answer yes, you will need to
provide the Telnet port number.
U
SING
M
ANAGE
M
ODE
seclevel
Displays the current security level configuration data.
User Level Databases Menu:
Authentication Database Location: Status Telnet Port
--------------------------------------------------------------------
1) RADIUS Authentication Server ENABLED 7001
2) TACACS Authentication Server ENABLED 7000
3) ACE Authentication Server ENABLED 7003
Select function from above or