Enterasys Networks CSX6000 - Manual (Page 281)

Central Site Remote Access Switch 281
C ONFIGURING A DVANCED B RIDGING
Bridge Filters
For Restricted Bridging, the following additional filter actions are available only on a system with
an Ethernet-2 adapter executing the local bridge option:
It is possible to use a discard filter action to selectively discard packets that have been forwarded
through the previous restricted bridging forwarding filters. The following chart summarizes the
discard filter actions available for Restricted Bridging:
Filter
Action
Distribution
List
Result
FORWARD LAN PORT 1 A packet matching this filter will only be forward-
ed on LAN port 1. The packet will not be sent to re-
mote sites connected over the WAN or to LAN
port 2.
FORWARD LAN PORT 2 A packet matching this filter will only be forward-
ed on LAN port 2. The packet will not be sent to re-
mote sites connected over the WAN or to LAN
port 1.
FORWARD LAN PORT 1
and WAN
A packet matching this filter will only be sent to re-
mote sites connected over the WAN and to LAN
port 1. The packet will not be forwarded on LAN
port 2.
FORWARD LAN PORT 2
and WAN
A packet matching this filter will only be sent to re-
mote sites connected over the WAN and to LAN
port 2. The packet will not be forwarded on LAN
port 1.
FORWARD Device List* A packet matching this filter will only be sent to
the specified Device List.
CONNECT Device List* A packet matching this filter will be connected to
the specified Device List.