Enterasys Networks CSX6000 - Manual (Page 224)

USER’S GUIDE
224 CyberSWITCH
Telnet session for authentication. Item (11), Terminal Server Security , allows you to specify type
of security for this special connection. See following description.
A UTHENTICATION T IMEOUT
Note: If using the Security Dynamics Ace Server, modify the timeout value to be greater than
the change frequency value of the SecurID cards. Refer to the Security Dynamics
documentation for more information on this change frequency value. In addition, if
you are using Connection Services Manager (CSM) for call control management, this
timeout value must represent the amount of time for the authenticating agent to
respond to the login attempt, and for CSM to respond as well. These times should be
based on network configuration.
T ERMINAL S ERVER S ECURITY
To specify the type of security for terminal server connections, select Terminal Server Security
from the User Network Login General Configuration Menu. A menu similar to the following will
be displayed:
Select the type of authentication desired.
U SING M ANAGE M ODE
netlogin
Displays the current network login configuration data. After entering the netlogin
command, you will be prompted for the type of login configuration information you want. The
prompt will resemble the CFGEDIT screen in which this information was originally
configured. You may display: user level security general configuration, login banners, login
configuration specific to RADIUS, and login configuration specific to TACACS.
netlogin change
Allows you to change the current network login configuration data. After entering the
netlogin change command, you will be prompted for the type of login configuration
information you want to change. The prompt will resemble the CFGEDIT screen in which this
information was originally configured. You may change: user level security general
configuration, login banners, login configuration specific to RADIUS, and login configuration
specific to TACACS.
Terminal Server Security Menu:
Authentication Database Location: Status
1) RADIUS Authentication Server NOT AVAILABLE
2) TACACS Authentication Server AVAILABLE
3) ACE Authentication Server NOT AVAILABLE
4) Use Administrative Login AVAILABLE
5) Do not allow terminal access AVAILABLE
Current Terminal Server Security is: Use Administrative Login
Select function from above or for previous menu: