Enterasys Networks CSX6000 - Manual (Page 622)

USER’S GUIDE
622 CyberSWITCH
tftp session
Displays the TFTP session information of active TFTP sessions. To get detailed information on
a specific session, enter the session’s Id number when prompted. You can not display the
session information for a TFTP session that has terminated. The following screen illustrates the
use of this command.
tftp stats
Displays the current TFTP related statistics. Refer to TFTP Statistics , for a list of available
statistics and their definitions.
T RACE C OMMANDS
Note: For an explanation regarding the output resulting from the family of trace commands, refer
to the Trace Messages chapter.
The following commands are used to enable and disable trace reporting information:
> TFTP PUT
>IP Address of the Host to receive the file
( to abort)? 19.233.45.33
>Enter the name of the local file to send (including the full path)
( to abort)? \config\config.nei
>Enter the name for the remote file (including the full path)
( for same as local)?
Enter the mode (BIN [binary] or ASC [ascii])
for ascii? bin
Sending File... Please wait
File Transfer Complete...
> TFTP SESSION
Id Sess-Id Local file Type/Mode Bytes Xmit Retries
----------------------------------------------------------
1 5 temp.txt Client/Put 12752 1
2 6 tmp Server/Get 423 0
3 7 text.txt Server/Put 8481 0
Select the ID of the TFTP Session to display or to cancel? 2
TFTP Session ID: 6
Type: Server
Mode: Get
Local Address: 190.5.6.8 (UDP Port: 5001)
Local File: c:\tmp
Remote Address: 190.5.6.11 (UDP Port: 5011)
Remote File: N/A
Transfer Mode: netascii
Bytes Transferred: 935
Bytes Remaining: 1145723
Total Retries: 0