AJA FS2 - Manual (Page 78)

78
The following table shows the selections and their results. In the table, SDI1-1 and
SDI1-2 are the two muxed streams entering the SDI1 Input.
6 Fiber1 3G
Detect This parameter configures 3G operation of the Fiber 1 video input. The input can be
set for 1080p50/60 (single video), Dual Stream 3G SDI (two muxed videos), or Auto-
Detect whether the input is 1080p50/60 single or Dual Stream 3G video (requires
SMPTE Format ID to be present in the SDI Input). See parametr 4 SDI 1 3G Detect for
an illustration and details.
4 SDI-3G Detect
Setting 5 SDI2 Input
Protect Setting 1 Video Input
Setting Resulting Input to
Crosspoint Matrix
Dual Video
Dual Stream
SDI1 SDI1-1
SDI2 (unused) SDI1-2
Normal
SDI1 SDI1-1
SDI2 SDI2
Single Video
Dual Stream
SDI1 SDI1
SDI2 SDI2
Normal
SDI1 SDI1
SDI2 SDI2
6 Fiber1 3G Format
Detect
Selections Selection Descriptions
Auto Detect (default)
1080p50/60
Dual Stream 3G
Automatically detects presence of 1080p50/60 or muxed video.
Configures the Fiber 1 input for 1080p50/60 video.
Configures Fiber 1 for Dual Stream 3G Video (uses SDI1 and SDI2 in
Input Crosspoint matrix).