AJA FS2 - Manual (Page 29)

1
29 FS2 Installation and Operation Manual — Front Panel Description
Pushbuttons These are the general rules of Menu Group button operation:
• Press one of the ten Menu Group buttons to access the associated
menu group. The SELECT and ADJUST knobs control the display
menus.
• The selected Menu Group button lights and the other buttons turn off.
• Each menu group returns to the last menu changed when you select
the button. After a reboot, each group displays its first menu.
• Hold down a button (turns blue) to make coarse adjustments using
the Adjust knob. Release the button to make fine adjustments.
The following text briefly lists the functions accessed by each pushbutton:
STATUS: Displays the Status Menu Group, which shows current machine
status and error conditions:
• Video 1, Video 2, and Caption status
• Reference and GenLock status
• Output Status
• Power and Temperature status
• System Name display
• Alarms
REMOTE: Displays the Remote Menu Group, which lets you select how to
control the FS2:
• Control by local front panel, remote devices, or local and remote
• GPI input and output behavior
CONFIG: Displays the Config Menu Group, which lets you configure the
FS2 for your environment:
• System Name setting
• IP and SNMP settings, MAC address
• Alarm control
• Hidden Menus and Display intensity (brightness)
• System serial number and software version
• System reboot
PRESET: Displays the Reg Menu Group, which accesses the memory
registers:
• Store and Recall Presets
• Factory Preset (defaults)
SYSTEM: Displays the System Menu Group, which lets you change or
enable FS2 video and audio input and system functions:
• Video input format settings, including 3G setup
• Audio input format and sample rate conversion settings
• Genlock reference source selection
• Frame rate selection and NTSC standard (North America/Japan)
• Input downconversion setting (HD to SD)
• HDMI RGB Range