AJA FS2 - Manual (Page 192)

194
Video Input/Output Formats
The following topics list the FS2 video input/output formats.
Note: These frame rates are not available with current software at inputs or
outputs: 720p23.98/24/25/29.97/30. Also, the Component I/O does not yet
support 1080p. These formats will be supported in a future release.
SDI and Fiber There are two standard SDI video inputs and outputs, and two optional Fiber
video inputs and outputs. All SDI video inputs and outputs, including Fiber,
are YCbCr 4:2:2 pixel format. The FS2 does not accept or produce 4:4:4
YCbCr, RGB, or XYZ inputs or outputs, or YCbCr 4:2:2 12-bit inputs or outputs.
These are the FS2 SDI and Fiber Optic video input/output formats:
SD-SDI, 270Mb (SMPTE 259):
• 525i/59.94
• 625i/50
HD-SDI, 1.4835Gb (SMPTE 292):
• 720p/59.94
• 1080i/59.94
• 1080PsF/23.98, 1080PsF/29.97
• 1080p/23.98, 1080p/29.97
• 2Kx1080p/23.98, 2Kx1080p/29.97
HD-SDI, 1.485 Gb (SMPTE 292):
• 720p/50, 720p/60
• 1080i/60
• 1080PsF/24, 1080PsF/25, 1080PsF/30
• 1080p/24, 1080p/25, 1080p/30
• 2Kx1080p/24, 2Kx1080p/25, 2Kx1080p/30
Dual-link HD-SDI, 2x 1.4835Gb (SMPTE 372):
• 1080p/59.94
• 2Kx1080p/59.94
Dual-link HD-SDI, 2x 1.485Gb (SMPTE 372):
• 1080p/50, 1080p/60
• 2Kx1080p/50, 2Kx1080p/60
3G HD-SDI, 2.967Gb (SMPTE 425):
• 1080p/59.94 (Level A or B)
• 2Kx1080p/59.94 (Level A or B)
• Dual Stream (2 streams 1.4835Gb HD-SDI)
3G HD-SDI, 2.97Gb (SMPTE 425):
• 1080p/50, 1080p/60 (Level A or B)
• 2Kx1080p/50, 2Kx1080p/60 (Level A or B)
• Dual Stream (2 streams 1.485Gb HD-SDI)