AJA FS2 - Manual (Page 185)

1
187 FS2 Installation and Operation Manual — Remote Screen
Authentication The Authentication setting enables or disables an authentication login requirement.
When login is required, the user must enter a System Password via the web browser
before FS2 access is permitted. The default password is “password”.
You can change the password by selecting Authentication on the Remote browser
screen and selecting Login. This action reveals Set Password and Confirm Password text
entry fields; you then enable authentication by entering the new password in both
fields and clicking the Enable Authentication button below the password fields. After
you click Enable Authentication, a dialog pops up to confirm password acceptance or
failure. In the event of failure, enter another password in both fields and click Enable
Authentication.
Note: If authentication is used, it provides only a minimum security safeguard
against unauthorized use of the FS2. The authentication mechanism is simple and
does not provide robust security.