AJA FS2 - Manual (Page 55)

1
1
Chapter 4:
Display Menus
4
Turn the Select knob to scroll
through parameter menus.
Push Select to undo changes.
SELECT ADJUST
14.1 Output Timing H
0
SDI 1 1080i59.94
Use buttons to select
a Menu Group
Status Config System Video 1 Video 2
Remote Preset Output Audio1 Audio 2
Parameter Menu
Current Setting
Menu Group & Status
Info or Prompts
Turn Adjust to
change current setting.
Hold down Adjust to
restore default value.
Controlling the FS2 via Front Panel Display Menus
There are three ways to control the FS2: (1) direct control using the front panel
buttons, knobs, and display menus, (2) remote control using a web browser, and
(3) remote control using an optional remote panel. This chapter describes the
first, using the front panel controls, which is the most direct and all-inclusive
way to configure and use an FS2. The other methods are described in
subsequent chapters.
In Chapter 2 we discussed the panel controls overall, so please read and
understand that material first. In this chapter we discuss each of the Parameter
Menus and their use. These are the topics covered:
• “Menu Operation Examples” on page 58
• “STATUS Menu Group” on page 62
• “REMOTE Menu Group” on page 65
• “CONFIG Menu Group” on page 68
• “PRESET Menu Group” on page 75
• “SYSTEM Menu Group” on page 76
• “OUTPUT Menu Group” on page 85
• “VIDEO 1 and VIDEO 2 Menu Groups” on page 89
• “AUDIO 1 and AUDIO 2 Menu Groups” on page 112