AJA FS2 - Manual (Page 100)

100
12.9 Color Blue
Gamma This parameter adjusts the RGB Blue Gamma by a factor of -1.0 to +1.0 in steps of
0.05, using the ADJUST knob.
13.0 Custom
Size/Pos This parameter turns custom image settings 13.1–13.8 On or Off. The custom
settings determine the image size and shape for Upconvert and Downconvert
modes 6 and 7 if you choose the Custom selection for those modes.
The Custom controls 13.1–13.8 are only displayed when Custom Size/Pos is On. When
Custom Size/Pos is Off, parameters 13.1–13.8 are skipped in the menu system, and
the UFC hardware is programmed for unity.
Note: this menu is not displayed when Active Format Description (AFD) is in control
of the Conversion Mode. While downconverting, with Downconvert Mode set to
Auto AFD, any values assigned for Custom Size/Pos parameters are ignored, and the
menus are hidden.
13.1 Custom Size This parameter changes the H and V size of the output picture by the specified
percentage (%) while maintaining the current aspect ratio. If Custom Size/Pos is On
and this parameter is not unity (100%) for the current mode, the front panel UFC
LED lights.
Custom Size is stored separately for each Conversion Mode. Values for each of the
Upconvert modes, Downconvert modes (excluding AFD), and SD Aspect Ratio
modes (excluding OFF), plus no conversion (or HD CrossConvert), are
independently stored (per Vid Proc).
12.8 Color Blue Black
Level
Selections Selection Descriptions
Variable Adjusts Blue Black level from -20 IRE to +20 IRE in 0.5 steps.
Default (unity): 0 IRE
12.9 Color Blue Gamma
Level
Selections Selection Descriptions
Variable Adjusts Blue Gamma level from -1 to +1.0 in 0.05 steps.
Default (unity): 0
13.0 Custom Size/Pos Selections Selection Descriptions
Off (default)
On
Sets this parameter and related custom size/pos parameters to off.
Enables this parameter and related custom size/position parameters.
13.1 Custom Size Selections Selection Descriptions
100% (default)
10% to 200%
Maintains 100% picture size for the selected format.
Enables changing the picture size using the ADJUST knob.