AJA FS2 - Manual (Page 193)

1
195 FS2 Installation and Operation Manual —
HDMI The HDMI input automatically accepts RGB 4:2:2 or YCbCr 4:2:2. HDMI outputs are
configurable between RGB and YUV. HDCP copy protected video is not
supported.
These are the FS2 HDMI input/output formats:
• 525i/59.94
• 625i/50
• 720p/50, 720p/59.94, 720p/60
• 1080i/59.94, 1080i/50
• 1080p/23.98, 1080p/29.97, 1080p/59.94, 1080p/24, 1080p/25, 1080p/30, 1080p/50, 1080p/60
Component
Analog The Component Analog Input accepts YUV, configurable to SMPTE or Betacam
levels. The Component Analog Output is configurable to YUV (Betacam or
SMPTE), or RGB.
These are the FS2 component analog video input/output formats:
• 525i/59.94
• 625i/50
• 720p/50, 720p/59.94, 720p/60
• 1080i/59.94
• 1080PsF/23.98, 1080PsF/29.97
• 1080p/23.98, 1080p/29.97
• 1080PsF/24, 1080PsF/25, 1080PsF/30 (SMPTE 274)
• Output only: 1080p/24, 1080p/25, 1080p/30 (SMPTE 274)
Composite Analog These are the FS2 composite analog video input/output formats:
• 525i/59.94 (switchable 7.5 IRE or 0 IRE setup)
• 625i/50
Reference These are the reference video formats:
• 525i/59.94 analog composite
• 625i/50 analog composite
• Tri-level sync
Computer (VESA)
Formats The FS2 accepts these computer (VESA) video formats:
• 640x480 (VGA) - 60 Hz
• 800x600 (SVGA) - 60 Hz
• 1024x768 (XGA) - 60 Hz
• 1152x864 - 75 Hz
• 1280x768 (WXGA) - 60 Hz
• 1280x960 - 60 Hz
• 1280x1024 (SXGA) - 60 Hz
• 1600x1200 (UXGA) - 60 Hz
• 1680x1050 (WSXGA+) - 60 Hz
• 1920x1200 (WUXGA) - 60 Hz