AJA FS2 - Manual (Page 19)

1
19 FS2 Installation and Operation Manual — Overview
Typical Applications The FS2 can be used in a very wide variety of video and audio signal
conversion, adaptation, timing, and processing applications:
• Up/down/cross conversion between various SD and HD formats,
including 1080p50/60.
• General purpose video frame synchronization.
• Analog-to-Digital and Digital-to-Analog audio/video conversion.
• Mux or Demux two separate HD signals from one 3G SDI signal.
• Convert 3G/HD/SD video over fiber to/from SDI (BNC).
• Use the built-in video processing amplifiers to adjust and/or color
correct.
• Synchronize the timing of key and fill signals by putting both through
the parallel FS2 video processors and adjusting their timing
independently. Then key them using one of the two FS2 keyers or an
external keyer.
• Use the HDMI input and a DVI-to-HDMI cable to scan-convert popular
computer video formats to SD or HD, including full proc-amp
functionality and aspect ratio adjustment.
• HD sidebar keying including using both SD video and SD sidebar
graphics (analog or digital), upconverting both, and combining—all
in the FS2.
• Dolby E Decoder Card option. (Dolby E Encoder is a future option.)