Rockwell Automation 20G PowerFlex 750-Series AC Drives - Manual (Page 69)

Rockwell Automation Publication 750-RM002B-EN-P - September 2013 69
Drive Configuration Chapter 1
Example
A PowerFlex 755 drive is controlled via the embedded ethernet (Port 13)
remotely by a PLC. Normal operation prevents any type of control from being
issued from the remote HIM (Port 2). However, the ability to manually control
the drive via the HIM is needed in some cases. To assure these two modes of
control, masks are set as follows.
This masks out (disables) the remote HIM (Port 2) to control the logic
command word (such as start, jog and direction) when the drive is in Auto mode
and lets (enables) the HIM to control the logic command word when the drive is
in Manual mode.