Rockwell Automation 20G PowerFlex 750-Series AC Drives - Manual (Page 133)

Rockwell Automation Publication 750-RM002B-EN-P - September 2013 133
Feedback and I/O Chapter 2
Related PowerFlex 753 selection parameter information is noted below.
Depending on the PowerFlex 750-Series Option Module or Modules installed in
the drive, related selection parameter information is noted below.
Example
Below is an example of a PowerFlex 753 drive’s utilizing an embedded digital
output Sel parameter being configured such that the output energizes when a
fault is present on the drive.
Parameter No. Parameter Name Description
230 RO0 Sel Selects the source that energizes the relay output.
240 TO0 Sel Selects the source that energizes the relay or transistor output.
Parameter No. Parameter Name Description
10 RO0 Sel Selects the source that energizes the relay output.
20 RO1 Sel or TO0 Sel Selects the source that energizes the relay or transistor output.
30 TO1 Sel Selects the source that energizes the transistor output.