Rockwell Automation 20P PowerFlex Digital DC Drive - Manual (Page 349)

Rockwell Automation Publication 20P-UM001I-EN-P - February 2013 349
Appendix
H
PowerFlex DC Standalone Regulator Installation
This appendix contains installation information specific to the PowerFlex DC
Standalone Regulator (SAR). The PowerFlex DC SAR and Gate Amplifier are
currently sold through Rockwell Automation Drive Systems only. Consult the
factory for availability.
Installation and Wiring
Instructions Complete the following for SAR installation and configuration:
1. Read and complete all installation and configuration instructions for the
SAR and Gate Amplifier contained in the PowerFlex DC Standalone
Regulator and Gate Amplifier User Manual, publication number 23P-
UM001.
2. Read and complete all additional power, control and I/O wiring,
grounding, and configuration instructions in Chapter 1 Installation and
Wiring of this manual pertaining to the frame A PowerFlex DC drive.
3. Continue with the instructions in Chapter 2 Drive Start Up of this
manual.
IMPORTANT Do not change (undo) any of the installation or configuration settings made to
the SAR (as instructed in the PowerFlex DC Standalone Regulator and Gate
Amplifier User Manual) when completing the instructions from Chapter 1 of
this manual.