Sensaphone SCADA 3000 Users manual - Manual (Page 72)

10-4
SCADA 3000 User’s Manual
DIALOUT SeTTINGS
Dialing method
The Dialing Method parameter lets you program whether SCADA 3000 will dial out in Pulse
or Tone. The default setting is Tone.
Dialing Prefix
The “Dialing prefix” box on the System Settings form is for email prefixes only. If for instance
the SCADA 3000 is on an office phone system where it had to dial a “9” to get an outside
line, entering a “9” here will force the SCADA 3000 to dial “9” before dialing the email server
phone number.
To enter a specific prefix for dialout types other than email, go instead to the Dialout
Destination screen (see “Destinations” section later in this chapter) and enter the prefix with
the phone number in the Destination column, following the instructions under “Special
Dialing Codes.” You must enter each prefix manually for each individual phone number that
requires one.
maximum Calling Rounds
The maximum number of times SCADA 3000 will dial through the list of destinations to
attempt to deliver either an alarm or a report.
Programmable range: 0–100 calling rounds
Default setting: 100 calling rounds
Alpha Pager Speed
This is the baud rate of the data connection between SCADA 3000 and your alphanumeric
pager service.
Programmable settings: 300, 1200, 2400
Default setting: 1200
Voice Repetitions
The number of times SCADA 3000 repeats the alarm message during a dial out alarm call.
Programmable range: 0–10
Default setting: 2
Advanced Button
Clicking on this button brings up the “Adavanced Dialout” form. The form handles three user-
settings.
PC Dialout is for use on SCADA 3000 units connected to radio networks. Checking
this box allows the connected PC to handle the Alarm Dialout calling. You must
have both a speakerphone modem and sound card installed in your PC for you to
use the PC alarm dialout feature.
Alarm Dialing Priority: When checked this allows the SCADA 3000 unit to override
any current PC communications in order to make phone calls when an alarm is
triggered.
Email Delivery Settings: The radio buttons here let you choose between the default
phone number or a different number for Emails. See Chapter 20: Email Server
Option for more information.